Português
Deutsch
Français
Italiano
日本語
Español
Việt Nam
한국어
Alcohol fireplaces are roughly divided into two types: intelligent alcohol fireplaces and manual alcohol fireplaces. The biggest advantage is the convenience and diversity of installation. Because alcohol fireplaces do not need flue, they can be displayed in any area. It produces a small amount of carbon dioxide and water, which is absolutely healthy and environmentally friendly. Because the alcohol fireplace belongs to the real fire fireplace series, its flame is flexible and beautiful. It is the vane leading the interior design in recent years. So what is such a beautiful thing when it is used? Is the operation method the same?
Precautions before the operation of the alcohol fireplace:
1. Place the alcohol fireplace horizontally. Make sure that there is no ignitor within half a meter of the furnace body and the area where the alcohol fireplace is placed must be flat without excessive height difference. If there is really no good choice, it can also be installed on an inclined slope. At 15°, once this value is exceeded, the built-in anti-tip self-locking device of the alcohol fireplace will be activated, and the body will alarm and lock and it will not be able to open.
2. Connect to the power supply (depending on the model, some alcohol fireplaces may be imported from abroad. In this case, a conversion plug is required. Generally speaking, 110V-240V sockets can be used) and start working; if it is using indoor AC, Then please confirm that there is a leakage circuit breaker protection device.
3. Generally, there is a plastic nozzle near the panel door of the alcohol fireplace. This is where we will refuel in the future. The operation is very simple. Take the hose distributed with the fireplace, connect the plastic nozzle at one end, and put it in the other end. In the alcohol fuel, press the refill switch to start the fuel filling. When the alcohol fireplace is used for the first time, if enough fuel is not filled within 30 minutes, the body will lock itself after an alarm. Panic, just add it normally until it is fully filled. The entire filling process is very simple. If alcohol is spilled, it can be used safely after wiping.
According to the volume of the burning box, the burning time of the alcohol fireplace is different. The short is 35-55 minutes and the long is 4-7 hours. When the alcohol fireplace is burning, we need to pay attention to the following Four o'clock:
1. Alcohol fireplaces belong to the category of real fire fireplaces. Therefore, when there are no adults or guardians with full civil capacity on the scene, minors use alcohol fireplaces alone, which may be caused by touching the furnace body, glass, flames and other high-temperature parts. Burns may also cause greater safety accidents by knocking over the burning alcohol fireplace.
2. When the alcohol fireplace is in use, it must be placed in a dense area away from doorways, emergency passages, and main corridors in areas with frequent activities.
3. If we use the alcohol fireplace every day, when the alcohol is exhausted and need to add fuel, we must pay attention to it. We must wait for the overall temperature of the alcohol fireplace to drop to 50°C or below. Generally, it is about 15 minutes. Rear. Do not add alcohol when the alcohol fireplace is working. This is a very dangerous improper operation.
4. When we use a manual alcohol fireplace, if we want to turn it off, we can use the fire rod or the related fire extinguishing cover that comes with the alcohol fireplace to extinguish the flame and stop burning; and if we use the smart alcohol fireplace, only It needs to be operated via APP or remote control.
Modern environmentally friendly smoke-free alcohol fireplaces use biomass with a purity of 95% as pure fuel, and its heat is 8000-11000 kcal per hour, which can heat an area of 60-75 square meters. It is also because of its convenience. Fireplaces are becoming the primary choice for owners and designers in decoration design.